Intelligent chart recorder DS 500 for compressed air and gases
Intelligent chart recorder with up to 12 sensor inputs. 7" colour display with touch panel.
Details
- Measuring the mass flow. Direct output of the Standarized volume flow possible without additional Measuring of Pressure and Temperature.
- Compact device for installation in limited space, no inlet and outlet sections required thanks to integrated flow straightener
- Highly accurate for both low and high flows
- Simple installation and removal of the sensor. The integrated Measuring section can remain in the pipe for cleaning the sensor and can simply be closed with a cap.
- No moving parts, therefore Low maintenance
- Can be used for Compressed air and non-corrosive gases such as Nitrogen, Oxygen, Argon, Helium, etc.
- 04...20 mA, pulse and a Modbus RTU (RS 485) interface as standard
- Optional interfaces such as Modbus TCP (Ethernet), PoE, M-Bus
- Pressure range up to 40 bar
- Temperature range up to 80°C
- Integrated display for showing the Measured values
- Available from ½" to 2"
- Settings can be selected via the buttons on the display
- Main counter reading can be reset via the Display
- For Velocities up to 224 Nm/s
- Highly accurate with an Accuracy of ± 1.5% or ± 1% of Measured value - and ± 0.3% of final value
Accessories
Chart recorder - DS 400
Tried and tested Chart recorder with 3.5" graphic display with touchscreen. Integrated Data logger option. Up to 4 sensor inputs. Optional Ethernet/ RS 485 interface.
DS 52 - Digital process meter
in an attractive wall-mounted housing, suitable for commercially available sensors with 0(4)...20 mA signal.