Ultrasound Camera UltraCam LD 500/510

The UltraCam LD 500/510 uses 30 MEMS microphones for the Calculation and visualization of the ultrasonic image. In addition, the device makes inaudible ultrasound audible, even in noisy environments during production.

shows you on the screen where the Leak is located
Leak detection possible during production without interrupting system operation
Very intuitive and no training required!
5 LEDs and ambient light sensor for intelligent lighting in dark environments
Function for estimating Leakages (l/min or cfm) and (cost per year)
Running time > 6 h with continuous operation
The lightest acoustic camera on the market at 600 g
Can be connected to existing LD 500/510

Request product directly

to the inquiry

The product has been added to inquiry.

to the inquiry

add to inquiry

Remove product from the inquiry

add to inquiry

Remove product from the inquiry

add other products to inquiry

Request product directly

to the inquiry

add other products to inquiry

Details

Around 10% of total industrial electricity consumption is used for compressed air generation in industrialized countries, and in Germany the figure is as high as 14%. Leakages are the main factor for energy losses and most compressed air systems show losses in the range of about 20 % to 40 %, in bad systems even more than 60%. Fixing compressed air leaks is the most effective action for reducing the energy consumption.

The Ultrasound Camera will let you find compressed air leaks much faster than traditional leak detectors and makes to process much more intuitive and easier. This is how it works: The Ultrasound Camera uses 30 digital mems, an FPGA, and a processor for calculating the ultrasound map. The used algorithm is called beam forming. The LD 500 displays the overlayed image on the display to the user automatically.

Finding leaks is a recurring marathon and not a single sprint. Due to its light weight (600 grams) and long battery life (7 hours) the LD 500/ LD 510 was made for finding compressed air leaks the whole day. Also, the holster will support the user because the wight must not be carried the whole time and gives him/ her an additional free hand if needed.

To reduce the energy consumption the compressed air leaks must be also fixed. To prioritize and plan the repair – information must be stored right at the leak place. The LD stores

where is the leak?
what needs to be done to fix it?
What are the estimated costs of each leak?
image of a leak showing the leaking element

The generated data of an audit of sometimes several hundred leaks can be managed locally or online using the Leak Reporter Software. With just a few clicks, automatic leakage reports (PDF, CSV) can be generated showing all important information about each leak and a cover sheet with a general overview.

The short answer: Yes! You will have to update the software of your LD and eventually; we will have to exchange the mainboard.
For further information – please contact us directly!

Datasheet

Data sheet UltraCam LD 500/510

Instruction manual

Instruction manual - LD 500 Instruction manual - LD 500 (short version) Instruction manual - CS Leak Reporter Software Instruction manual - CS Leak Reporter Cloud Solution

Downloads

Technical article on the subject of leakage measurement in compressed air Scientific_paper__Leakage_TR.pdf Scientific_paper_Leakage_SE.pdf Fachaufsatz_Leckage_DE.pdf Sample report according to ISO 50001 Scientific_paper_Leakage_EN.pdf Demo Report - ISO 50001 Scientific_paper_Leakage_ESP.pdf Scientific_paper_Leakage_FR.pdf Scientific_paper_Leakage_IT.pdf

Related products

LD 500/510 - Leak detector with camera

Due to the integrated camera and the available accessories our starter kit for leak detection enables reliable leak detection as well as compressed air leakage calculation and reporting according to ISO 50001.