Provides an illustrated overview of the Leakages found and their savings potential. Corrective measures including status display can be defined for each Leak.

OS: Win7x64 or higher, Mac

Supported devices: LD 500/510

Version: 1.3.7

The CS Leak Reporter Cloud solution combines the functionalities of the CS Leak Reporter V2 with a browser-based cloud system.

1. Register an account with your e-mail address
2. Activate a purchased license or the trial license (30 days)
3. Use the Software

OS: no installation required, access via www.leak-reporter.com

Supported devices: LD 500/510

The CS Soft Basic software is used to read out the measurement data via Ethernet or USB stick and enables the customer to analyze the measurement data graphically or in tabular form. Statistical evaluations and a consumption evaluation round off the functions. The measurement data can be exported as a pdf file or Excel ® file. The CS Soft Energy Analyzer add-on module is used to analyze the load/idle times of Compressors. At the touch of a button, the user receives important data, such as electricity costs, compressed air costs, leakage costs in euros, compressor data with load/idle times, specific output in kWh/m³, costs of Compressed air in euros per m³. The Software can be used for a maximum of 10 days after downloading without a license key. After 10 days, the Software must be registered by entering a license key (subject to a fee).

OS: Windows 10 or higher

Version: 2.0.0.44

Supported devices: DS 500, DS 500 mobile, DS 400, DS 400 mobile, DP 500, DP 510, PI 500

*** Attention file must be unpacked before opening ***

With the CS Service Software (article no. 0554 2007) in conjunction with the interface adapter, the digital interface (Modbus RTU) of the Consumption sensors from CS INSTRUMENTS can be accessed directly from the PC via the USB interface. The service software enables the user to scale the 4...20 mA Analogue output, change the units and much more...

Version: 1.0.1.48

For the devices: VA 500, VA 520, VA 550, VA , VX 570, VU 570

This firmware (software in the sensor) brings your VA 500/ VA 520 up to date. Simply download the file and import it into the sensor using the Service Software.

Version: 1.73

For VA 500/ VA 520 devices up to HW version lower than V3.00:

For VA 500/ VA 520 devices from HW V3.00:

This firmware (software in the sensor) brings your VA 550/ VA 570 up to date. Simply download the file and import it into the sensor using the Service Software.

Version: 1.73

For VA 550/ VA570 devices up to HW version lower than V2.00:

For VA 550/ VA570 devices from HW V2.00:

This firmware (software in the sensor) brings your VU 570 up to date. Simply download the file and import it into the sensor using the Service Software.

Version: 1.73

For the devices: VU 570

This firmware (software in the sensor) brings your VX 570 up to date. Simply download the file and import it into the sensor using the Service Software.

Version: 1.73

For the devices: VX 570

This firmware (software in the sensor) brings your FA 515 up to date. Simply download the file and import it into the sensor using the Service Software.

Version: 1.98

For the devices: FA 515

This firmware (software in the sensor) brings your FA 500 up to date. Simply download the file and import it into the sensor using the Service Software.

Version: 1.35

For the devices: FA 500

This firmware (software in the sensor) brings your FA 550 up to date. Simply download the file and import it into the sensor using the Service Software.

Version: 1.34

For the devices: FA 550

The CS Service Software (article no. 0554 2005), in conjunction with the IF 100 interface adapter, can be used to access the digital interface (SDI) of the Dew point and volume flow sensors from CS INSTRUMENTS directly from a PC via a USB interface. The service software enables the user to scale the 4...20 mA Analogue output, change the units etc., for example.

Version: 4.70

Supported devices: FA 300, FA 400, FA 410, FA 415, VA 300, VA 400, VA 420

Use this firmware (device software) to update your LD 500 / LD 510 to the latest version. Simply download the file, save it to the USB stick, unzip it and then run the update in the LD 500/510's System Update menu. Please ensure that the DEV0004 folder is located in the root directory of the USB stick.

Version: 5.18

For the devices: LD 500, LD 510

Use this firmware (device software) to update your LD 450 to the latest version. Simply download the file, save it to the USB stick, unzip it and then carry out the update in the LD 450's System Update menu. Please ensure that the DEV0004 folder is in the root directory of the USB stick.

Version: 4.08

For the devices: LD 450