Standard measuring chamber for compressed air up to 16 bar

Standard measuring chamber

When using the dew point sensors, it is always recommended to use a suitable measuring chamber. In this way, the sensor can be very easily inserted and removed from any compressed air line by means of a quick coupling. The advantages of using the measuring chamber are as follows:

  • Since the sensor does not have to be unscrewed, it can be easily installed and removed under pressure
  • Service and calibration work is possible without interrupting production.
  • The pressure dew point is measured via the measuring chamber in the same way as for inline measurement, since the same pressure prevails in the measuring chamber as in the pipeline.
  • An air flow of approx. 1l/min escapes via the copper capillary of the measuring chamber. This results in a forced flow and no "stagnant" air is measured. In addition, the reaction time is thus shortened.
  • The measuring chamber isolates the sensor from the line. This prevents the sensor from being clogged by dirt in the compressed air, which may well be the case if it is installed directly in the line.
to the inquiry

The product has been added to inquiry.
to the inquiry

Details

for compressed air up to 16 bar

Order no.: 0699 3390

Similar products

Portable dew point meter DP 510 with third party sensor

DP 510 - Portable dew point meter with third-party sensor

Disposes all functions of our DP 500 and comes with an additional - freely assignable - sensor input.

More
Stationary dew point measurement in compressed air systems with DS 400 - dew point set

DS 400 Set - Stationary dew point measurement in compressed air systems

Ideal for the monitoring of refrigeration or adsorption dryers.

More

FA 500 - Dew point sensor with integrated display and alarm relay

Ideal instrument for dew point measuring for all kinds of dryers.

More
The dew point sensors FA510/515 for the typical use in refrigeration dryers

FA 510/515 - Dew point sensor for adsorption dryers

For residual moisture measurement after desiccant dryers/ membrane dryers from -80 to 20°Ctd. New: with Modbus-RTU interface.

More