VA 520 - Thermal mass flow meter for flow measurement

Record and reduce your energy costs and increase your Sustainability with the VA 520. Monitor your Consumption and analyse your Leakages with a permanently installed flow meter in distribution stations, in front of individual departments or for billing purposes of individual Consumers.

to the inquiry

The product has been added to inquiry.
to the inquiry

Details

  • Measuring the mass flow, direct output of the Standarized volume flow
  • Highly accurate for both small and large flows
  • Pressure and temperature-compensated thanks to the thermal mass flow principle
  • Easy installation and removal of the sensor, the integrated measuring section can remain in the pipe for cleaning or recalibration of the sensor and can simply be closed with a cap
  • No moving parts, therefore Low maintenance
  • Disappearingly low pressure loss due to extremely low blockage of the diameter
  • Can be used for Compressed air and non-corrosive gases such as Nitrogen, Oxygen, Argon, Helium, etc.
  • 04...20 mA, pulse and a Modbus RTU (RS 485) interface as standard, optional interfaces such as Modbus TCP (Ethernet), PoE, M-Bus
  • Optional: Bi-Directional Measuring
  • Pressure range up to 40 bar
  • Temperature range from -30 to 80°C
  • Protection class IP65
  • Integrated display for showing the Measured values
  • Can be used from DN 8 to DN 80
  • Settings can be adjusted using the buttons on the display
  • Main counter reading can be reset via the Display
  • For Velocities up to 224 Nm/s
  • Highly accurate with an Accuracy of ± 1.5% or ± 1% of the Measured value and ± 0.3% of the final value

Similar products

VA 550 - Thermal mass flow sensor for flow measurement

Insertion type sensor for demanding industrial applications, comes with ATEX approval for Ex zones or DVGW approval for use in Natural gas.

More

VA 570 - Thermal mass flow meter for consumption measurement

ATEX approval for Ex zones and DVGW approval for use in Natural gas.

More

VA 500 - Flow meter for compressed air and gases

RS 485 Modbus interface, 4...20 mA Analogue output, Pulse output integrated as standard.

More

M-Bus - Industrial gas meter

Modern gas meters with M-Bus for Compressed air, Natural gas, Biogas and many other industrial gases.

More

Accessories

Intelligent chart recorder DS 500 for compressed air and gases

Intelligent chart recorder with up to 12 sensor inputs. 7" colour display with touch panel.

More

Chart recorder - DS 400

Tried and tested Chart recorder with 3.5" graphic display with touchscreen. Integrated Data logger option. Up to 4 sensor inputs. Optional Ethernet/ RS 485 interface.

More

DS 52 - Digital process meter

in an attractive wall-mounted housing, suitable for commercially available sensors with 0(4)...20 mA signal.

More