Residual oil content measurement OILCHECK according to ISO 8573 - stationary solution

The residual oil content sensor OIL check measures the vaporous residual oil content in the compressed air. By means of a sample taking a representative part volume flow is taken from the compressed air and led to the OIL check. Due to the continuous measurement threshold value exceeding will be recognized immediately and remedial actions can be initiated to ensure oil-free compressed air.
  • OIL-Check 400 – residual oil content measurement of the vaporous residual oil content from 0.001…2,5 mg/m³, 3…16 bar. Highly precise PID sensor, integrated mini catalyst for zero point calibration
  • Permanent, highly precise residual oil measurement (oil vapor) with PID sensor (photo-ionic-detector)
  • Long-term stable measuring results due to automatic zero-point calibration. The integrated mini catalyst reliably generates a defined reference gas for zero-point calibration
  • Contrary to measuring systems which generate the ”zero air“ resp. reference gas by means of active carbon filters and which are there fore depending on the ageing and the saturation of the active carbon filters, the mini catalyst generates the ”zero air” without ageing or wear. There is no change of active carbon filters necessary
  • Easy sampling via PTFE hose or stainless steel pipe
to the request
The product has been added to the request.
to the request

Details

  • OIL-Check 400 - Residual oil measurement of the Vaporous residual oil content from 0.001...2.5 mg/m³, 3...16 bar. High-precision PID sensor, integrated mini-catalyser for zero-point calibration
  • Permanent, highly accurate residual oil measurement (oil vapour) with PID sensor (photo-ionisation detector)
  • Long-term stable measurement results thanks to automatic zero-point calibration. The integrated mini-catalyser reliably generates a defined reference gas for zero-point calibration.
  • In contrast to measuring systems that generate "zero air" or reference gas with activated carbon filters and are therefore dependent on the ageing and saturation of the activated carbon filters, the mini-catalyser generates the "zero air" without ageing and wear. No need to change activated carbon filters
  • Simple sampling via PTFE hose or stainless steel line

Similar products

Residual oil content measurement OILCHECK according to ISO 8573 - mobile solution

The residual oil content sensor OILCHECK measures the vaporous residual oil content in the compressed air. For a mobile solution we offer you a combination with the particle counter PC 400 and mobile chart recorder DS 500 mobile.

More
Mobile particle counter PC 400 according to ISO 8573

Particle counter PC 400 - mobile solution according to ISO 8573

PC 400 particle counter up to 0.1 µm for compressed air and gases in a service case.

More
Particle counter PC 400 according to ISO 8573

Particle counter PC 400 - stationary solution according to ISO 8573

The highly precise optical particle counter PC 400 measures particles from a size of 0.1 µm and is therefore suitable for monitoring of the compressed air quality class 1 ISO 8573.

More